Marine Hardware - Hatches

12 items

Sea-Dog Hatch Cover Pull Gasket [221842-1]

Hatch Cover Pull & Gasket Highly corrosion resistant, this Hatch Cover Pull provides a simpl...

Hatch Cover Pull & Gasket Highly corrosion resistant, this Hatch Cover Pull provides a simple and convenient way to open the hatches in your boat. Easy-to-install, it features a stainless steel washer for a tight and secure fit, and a rubber gasket to reduce noise and resist water penetration. Commonly used on deck mounted access hatches, this hatch cover pull not only looks attractive, but is durable for use in harsh marine conditions. Requires a 3/16” hole. Flange pull is 1-1/4” in dia...

$6.75 $5.99

Sea-Dog Stainless Steel/Nylon Hatch Spring [321...

Stainless Steel/Nylon Hatch SpringThis strong Hatch Spring has an internal cable that prevents t...

Stainless Steel/Nylon Hatch SpringThis strong Hatch Spring has an internal cable that prevents the spring from being overextended during normal use. Ideal for larger hatches and dock boxes. Constructed of corrosion resistant formed 304 stainless steel with heavy duty molded nylon mounting pads on both ends. Installs with eight #10 RH fasteners (not included).

$56.50 $44.99

Lewmar Right Handed Portlight Handle kit [36000...

Right Handed Portlight Handle kitFor right-sided handle operation.Compatible with:Older model Le...

Right Handed Portlight Handle kitFor right-sided handle operation.Compatible with:Older model Lewmar Portlights*Sold as an Individual

$14.95 $11.99

Beckson 10x24" Flush Hatch Horizontal or Vertic...

Flush Mount HatchFeatures: 1/2 inch Closed Height Weather-Tight Seal Opens full 180 degrees...

Flush Mount HatchFeatures: 1/2 inch Closed Height Weather-Tight Seal Opens full 180 degrees Nothing to Snag Lines One Hand Operation Mounts Vertical or Horizontal UV Stabilized Material Invisible Fasteners Textured Non-Skid Surface O.D. 9-1/2" x 23-7/8" I.D. 6" x 20-1/2" Hole Cut: 6-3/4" x 20-7/8"

$229.99 $190.99

Sea-Dog Triple Lock Rectangular Marine Hatch - ...

Triple Lock Rectangular Marine Hatch - 10" x 14" - BlackThis Triple Latch Marine Deck Hatch feat...

Triple Lock Rectangular Marine Hatch - 10" x 14" - BlackThis Triple Latch Marine Deck Hatch features 3 locking points which when engaged cause the camming surface to pull the lid into the gasket creating a water tight seal. Constructed of injection molded polypropylene with a structural honeycomb lid for superior rigidity and strength. Non-slip textured surface. Can be mounted horizontally or vertically. Full length piano hinge for added strength and security. Interior opening is 11-1/8" X 7...

$85.95 $63.99

Sea-Dog 90 Gas Lift Mount - Wide [321582-1]

90° Gas Lift Mount - Wide 90° Gas Lift Mounts are constructed of stamped 304 stainless steel. Us...

90° Gas Lift Mount - Wide 90° Gas Lift Mounts are constructed of stamped 304 stainless steel. Used for mounting gas filled lift springs. Installs with #10 RH fasteners (not included). 10 mm ball.

$11.65 $10.99

Beckson 5" x 12" x 1" Self Drain Opening Port [...

5" x 12" x 1" Self Drain™ Opening PortThe Beckson Self Drain™ Opening Port is innovatively desig...

5" x 12" x 1" Self Drain™ Opening PortThe Beckson Self Drain™ Opening Port is innovatively designed with an angled drainage ramp molded on the inside of the spigot. This design promotes drainage without having the hassle of making angled cuts in the hull. This also allows for thru-bolting, which is impossible in windows where an angled spigot extends below the bolt holes. The internal angle seats tightly against the gasket and lens, thus omitting an exterior water retention ledge present in ...

$280.40 $217.99

Beckson 5" x 12" x 2" Self Drain Opening Port [...

5" x 12" x 2" Self Drain™ Opening PortThe Beckson Self Drain™ Opening Port is innovatively desig...

5" x 12" x 2" Self Drain™ Opening PortThe Beckson Self Drain™ Opening Port is innovatively designed with an angled drainage ramp molded on the inside of the spigot. This design promotes drainage without having the hassle of making angled cuts in the hull. This also allows for thru-bolting, which is impossible in windows where an angled spigot extends below the bolt holes. The internal angle seats tightly against the gasket and lens, thus omitting an exterior water retention ledge present in ...

$280.40 $217.99

Beckson 14" x 24" Flush Hatch White - ASA Mater...

14" x 24" Flush Hatch White - ASA Material - Acrylonitrile Styrene AcrylateFeatures: 1/2” Closed...

14" x 24" Flush Hatch White - ASA Material - Acrylonitrile Styrene AcrylateFeatures: 1/2” Closed Height Weather-tight Seal Opens full 180 degrees Nothing to Snag Lines One-Hand Operation Mounts Vertical or Horizontal UV Stabilized Material Invisible Fasteners Color: White Non-Skid Diamond Pattern Surface

$219.99 $207.99

Sea-Dog Twist Type Hatch Adjuster w/Elbow - 11"...

Twist Type Hatch Adjuster with Elbow - 11" Constructed of corrosion resistant formed 304 stainle...

Twist Type Hatch Adjuster with Elbow - 11" Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple twist knob to lock into position. Great for dock box lids, hatches, windshields, etc.

$35.75 $28.99

Sea-Dog Hatch Adjuster - 14" [321292-1]

Hatch Adjuster - 14" Constructed of corrosion resistant formed 304 stainless steel with UV resis...

Hatch Adjuster - 14" Constructed of corrosion resistant formed 304 stainless steel with UV resistant injection molded nylon mounting pads and knob. These Hatch Adjusters feature a simple thumb screw knob to lock into position. Great for dock box lids, hatches, windshields, etc.

$37.95 $29.99

Beckson 18x21" Flush Hatch Horizontal or Vertic...

Flush Mount HatchFeatures: 1/2 inch Closed Height Weather-Tight Seal Opens full 180 degrees...

Flush Mount HatchFeatures: 1/2 inch Closed Height Weather-Tight Seal Opens full 180 degrees Nothing to Snag Lines One Hand Operation Mounts Vertical or Horizontal UV Stabilized Material Invisible Fasteners Textured Non-Skid Surface O.D. 18-1/8" x 20-1/2" I.D. 14-5/8" x 17" Hole Cut: 15-3/8" x 17-3/8"

$221.99 $217.99