Boat Outfitting

Uflex HYCO 1.1 Front Mount OB System up to 175H...

HYCO 1.1 Front Mount OB System up to 175HP - Includes UP20 FM Helm, 2qts of Oil, UC95-OBF Cylind...

HYCO 1.1 Front Mount OB System up to 175HP - Includes UP20 FM Helm, 2qts of Oil, UC95-OBF CylinderFeaturing the unique split tilt tube rod that allows for installation of the UC94 cylinder without removing the engine, the Hyco is an easy and affordable outboard hydraulic steering solution for boats with 150 horsepower and under. Coupled with the composite UP20 helm, the Hyco offers effortless steering with 5 turns lock to lock. And, it is applicable to almost all 2 and 4 stoke outboards engi...

Uflex PROTECH 1.1 Front Mount OB Hydraulic Syst...

PROTECH 1.1 Front Mount OB Hydraulic System - Includes UP28 FM Helm, Oil & UC128-TS/1 Cylind...

PROTECH 1.1 Front Mount OB Hydraulic System - Includes UP28 FM Helm, Oil & UC128-TS/1 Cylinder - No HosesDurability and performance define the Protech front mount outboard steering package. From the stainless steel helm shaft, heavy duty shaft seals, carbon steel piston and 304 electropolished and passivated stainless link assemblies, the Protech is built for maximum longevity and peak performance. Adjustable boss style fittings allow precise hose routing without the risk of breaking the...

Uflex Yamaha 90-115hp Zero Torque Feedback Till...

Yamaha 90-115 Zero Torque Feedback TillerThe four stroke outboard engines are generating high to...

Yamaha 90-115 Zero Torque Feedback TillerThe four stroke outboard engines are generating high torque loads which can make tiller steered boats difficult to steer. The Uflex® ZTF Tiller systems eliminate propeller torque at the tiller handle when the driver is not actively changing direction.Using a hydraulic valve, the propeller torque is locked from reaching the tiller handle unless the driver pushes or pulls on the end of the handle, at which point the valve opens and allows for active ste...

Uflex UP28R Rear Mount Helm 1.7 cu. 3/4" Tapere...

UP28R Rear Mount Helm 1.7 cu. 3/4" Tapered Stainless Steel ShaftFeatures: Available in four diff...

UP28R Rear Mount Helm 1.7 cu. 3/4" Tapered Stainless Steel ShaftFeatures: Available in four different displacement sizes Compact design Ball bearing piston race Built-in lock valve for positive rudder lock Integral relief valve for over-pressure protection 3/4” tapered stainless steel shaft Easily accessible lock valve and shaft seal for replacement Cast iron cylinder rotor for greater durability and longer life 1/4" NPT fitting for 3/8" tube Includes 90° adjustable fittings for 3/8” tube an...

Orion Whistle/Mirror Kit [744]

Whistle/Mirror KitAudible and visual signal for dry areas. Help rescuers note there is an emerge...

Whistle/Mirror KitAudible and visual signal for dry areas. Help rescuers note there is an emergency and guides them to your location. Audible signal will not freeze. Mirror (2 x 3) with lanyard and view finder. Made of plastic for durability. Help rescuers know there is an emergency and guide them to your location. Weighs only 2 ounces.Features: Attract rescuers with sight and sound High decibel whistle Unbreakable mirror with view finder and lanyard WARNING: This product can expose you to c...

Uflex Double Paddle Trim System [PTS-2]

Double Paddle Trim SystemDouble paddle kit including two paddles and the brackets to attach it t...

Double Paddle Trim SystemDouble paddle kit including two paddles and the brackets to attach it to a tilt or to a front mount helm.For complete control of engine trim and tilt, trim tabs, jackplates, PowerPole(R) and other on board systems, the innovative Paddle Trim system is the answer.Adaptable to existing front mount hydraulic and tilt helms, the Paddle Trim is ergonomically designed to allow the driver to make precise adjustments to the attitude of the boat or other systems without remov...

Bennett Rocker Switch Control f/BOLT [BRC4000]

Rocker Switch Control for BOLTThis control is ergonomically designed, water-resistant and provid...

Rocker Switch Control for BOLTThis control is ergonomically designed, water-resistant and provides a positive "click" when the trim tabs are engaged. Its lock-out feature prevents user from pressing down on opposite directions at the same time. The control is easy to install, fitting into any existing Bennett 2 +-inch Rocker Switch hole. WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For ...

Scanstrut Scanpod Single Instrument Pod Rail Mo...

Scanpod Single Instrument Pod Rail Mount - Cut f/Standard Instrument - Fits 1" - 1.33" RailsFeat...

Scanpod Single Instrument Pod Rail Mount - Cut f/Standard Instrument - Fits 1" - 1.33" RailsFeatures: Applications: Designed for (1) Standard Instrument Current sailboat designs often have very open cockpits with few options for installing retro-fit instruments The Rail Pod gives you an option for fitting smaller displays and instruments directly onto a rail, in a position which suits you Rail Mounted Universal Fixing Fits pedestal rails from 25mm to 33.7mm (0.98" - 1.33") Fit your display o...