Hunting & Fishing - Outrigger Accessories

125 items

Rupp Triple Lok-Up Halyard Line Lock w/Bungee [...

Triple Lok-Up Halyard Line Lock w/BungeeRupp Lok-Ups are an innovative locking pulley system tha...

Triple Lok-Up Halyard Line Lock w/BungeeRupp Lok-Ups are an innovative locking pulley system that locks your halyard lines, keeping your outrigger release clips right where you want them. Triple Pulley with 12" military grade bungee for Triple Rigging.Robust design that includes the following: Spring loaded trigger for positive locking and unlocking. Modular design that is adaptable to various rigging setups. Accepts a wide array of halyard line material and thicknesses. Replaceable, service...

$74.00

Rupp Outrigger Bushing Kit [CA-0032]

Outrigger Bushing KitReplace lost and worn out sleeves and bushings. Kit Contains: Enough Delrin...

Outrigger Bushing KitReplace lost and worn out sleeves and bushings. Kit Contains: Enough Delrin pieces to re-bush a complete pair of Rupp outriggers

$39.00

Rupp Replacement Spreader Tips - 4 Pack - Black...

Replacement Spreader Tips - 4 Pack- BlackFour replacement spreader tips for Rupp outriggers. Bag...

Replacement Spreader Tips - 4 Pack- BlackFour replacement spreader tips for Rupp outriggers. Bag includes four black Delrin spreader tips complete with o-rings.

$25.00

TACO Grand Slam 390XL Outrigger Mount [GS-390XL]

Grand Slam 390XL Outrigger MountTACO took all the durable, dependable features of the popular GS...

Grand Slam 390XL Outrigger MountTACO took all the durable, dependable features of the popular GS-380 and incorporated a more robust gusset and thicker arm to withstand the torque and pressure created when using longer outrigger poles. This base is perfect for the bigger, faster center console boats between 25’ and 40’. Anglers can easily deploy an outrigger’s vertical lift and horizontal rotation from the boat deck in rough seas. Additionally, the GS-390XL comes equipped with our secure pin-...

$4,799.99 $3,449.99

Ronstan Series 20 Ball Bearing Orbit Block - Si...

Series 20 Ball Bearing Orbit Block - Single - Dyneema Lashing - Becket OptionThe incredible Seri...

Series 20 Ball Bearing Orbit Block - Single - Dyneema Lashing - Becket OptionThe incredible Series 20 Orbit Block™ is capable of loads up to 250kg (550lb) while weighing a mere 9 grams. It's so light that it needs to be lashed down!Features: Integrated stainless steel hub to accept lashing attachment and through-sheave becket Suits up to 4mm(5/32") lashing Includes 750mm (30") x 1.7mm(1/16") diam lashing Applications:Control lines on dinghies and catamarans to 5M(16')Materials: Sheave: Hig...

$15.28 $12.99

Lee's 45 Degree Center Rigger Holder [AL7211CR]

AL7211CRThe AL7211CR (1-3/8"ID) is the perfect holder for boats in the 16 to 31 ft range. Its ec...

AL7211CRThe AL7211CR (1-3/8"ID) is the perfect holder for boats in the 16 to 31 ft range. Its economical price and small footprint (3"x 5") make it our most popular center rigger holder. The receiving tube of this marine grade anodized holder is set at a 45 degree angle. This is the perfect angle for boats where the mounting position is low and the cockpit is not extremely deep (e.g. mounting on T-Tops, Hard Tops, or Fly-Bridges). Compatible poles are 12 or 14ft in length and come standard i...

$122.50 $118.99

Lee's 1.75" Flush Mount Skiff Series Outrigger ...

Gunnel Mount Outrigger HoldersOH2016SSize: 1.75"Dimensions: 3 1/2 x 6Attractive, Strong, and Bul...

Gunnel Mount Outrigger HoldersOH2016SSize: 1.75"Dimensions: 3 1/2 x 6Attractive, Strong, and Bullet Proof all describe our Gunnel Mount Outrigger Holders. One piece flange construction. Plate, Tube and Bar-Pin are all cast simultaneously for the ultimate in strength. Curved Tube has Solid End Plug with Deep Slots to assure long service and reliability. Tubes are made with Port and Starboard slot orientation to optimize fishing angle. Flange mounts flush with gunnel. When tube is removed, gun...

$995.00 $895.99

Tigress Gunnel Mount Outrigger Holders - Fabric...

Gunnel Mount Outrigger Holder - Fabricated 304 S.S. - 1-1/8" I.D.- PairOur premium quality stain...

Gunnel Mount Outrigger Holder - Fabricated 304 S.S. - 1-1/8" I.D.- PairOur premium quality stainless steel outrigger holders are fabricated to our quality standards for years of service. All Tigress products are proven salt water worthy. For best installation, use our backing plates 88502-1 or 88505-1. For replacement tubes use 88501 or 88503.

$154.99 $105.99

Rupp Single Rigging Kit w/Klickers - Black Mono...

Single Rigging Kit w/Klickers - Black MonoComplete rigging packages that allow you to run One (1...

Single Rigging Kit w/Klickers - Black MonoComplete rigging packages that allow you to run One (1) lines on each rigger. this kit includes (2) exclusive Rupp single pulley shock cords, 160ft of BLACK MONO halyard lines one pair of Rupp KLICKER release clips. (2) Nylon ball stops, (2) Strap Eyes, (4) Heavy Snap Swivels, (4) Crimps-Nickel.

$124.00

Rupp Center Console Adjustable Center Rigger Ba...

Center Console Adjustable Center Rigger BaseThis adjustable center rigger mount allows the cente...

Center Console Adjustable Center Rigger BaseThis adjustable center rigger mount allows the center rigger pole to be set at various angles that mach the line of your outriggers or tower leg. Accepts any center rigger pole with outside diameter of 1.50".  Perfect for center console boats of any size.Mounting pad has 4"x 6" footprint.

$395.00

Rupp Triple Rigging Kit W/Lok-Ups & Nok-Outs - ...

Rupp Triple Rigging Kit W/Lok-Ups & Nok-Outs - 520' Black Mono CordComplete rigging packages...

Rupp Triple Rigging Kit W/Lok-Ups & Nok-Outs - 520' Black Mono CordComplete rigging packages that allow you to run three (3) lines on each rigger. This kit includes (2) exclusive Rupp triple pulley halyard line locks with shock cords, 520ft of 400lb black mono-filament halyard lines three pair of Rupp NOK-OUT release clips, (6) Nylon ball stops, (2) Strap Eyes, (12) Snap Swivels, (12) Swivels.

$399.00

Rupp Single Rigging Kit W/Lok-Ups & Nok-Outs - ...

Rupp Single Rigging Kit W/Lok-Ups & Nok-Outs - 160' Black MonoComplete rigging packages that...

Rupp Single Rigging Kit W/Lok-Ups & Nok-Outs - 160' Black MonoComplete rigging packages that allow you to run one (1) line on each rigger. This kit includes (2) exclusive Rupp single pulley halyard line locks with shock cords, 160ft of 400lb black mono-filament halyard lines one pair of Rupp NOK-OUT release clips, (2) Nylon ball stops, (2) Strap Eyes, (4) Snap Swivels, (4) Crimp Sleeves.

$172.00